How to make -
A Plain Cushion
zipped in a plain or patterned fabric
Materials
  • - Fabric
  • - Thread
  • - Zip (std NOT concealed)
  • - Cushion Pad
  • Tools
  • - Sewing Machine
  • - Zip Foot
  • - Needles
  • - Pins
  • - Scissors
  • - Set Square
  • - Straight Edge
  • - Invisible Marker
  • - Cushion Template
  • Step 4: Attach the Fabric Panels on the Zip Line

    JOIN THE PANELS ON THE ZIP EDGE

    • Align the 2 fabric panels face sides together and pin.
    • On one side, draw a line across the fabric 2cm up from the bottom edge and parallel to it.
    • Make a mark on the line 5cm in from each side.
    • With a single knotted thread, sew a line of tacking stitches all the way along the "2cm line".
    • Machine along the 2cm tack line in from each side of the fabric panel to the 5cm mark.
    • Reinforce the stitch at the 5cm marks.
    • Note the tacking stitch between the 5cm marks is where the zip will be (the zip opening).
    • Remove pins.
    • Open out and lay the joined panels right side down.
    • Press open the seam.
    This video shows you
    • How to pin the panels together.
    • How to mark out the seam.
    • How to tack the seam.
    • How to reinforce the stitch ends.
    • How to press the seam.

    Your Questions & Comments

    No comments yet. Be the first!

    Post Here